One of the most well-known printer producers in the world is Epson. Their products are renowned for their superb usability and reliable print quality. However, every printer and driver has a few drawbacks. Sometimes problems develop for uncontrollable technological and mechanical reasons. Epson printer error code 0x97 has often encountered an issue.
When an internal hardware issue arises, the Epson printer error code 0x97 acts as a sort of warning. The motherboard or another internal component may be at fault. Several internal printer components may fail if this issue manifests itself on the screen. Don't freak out if the Epson error code 0x97 occurs. The user needs to follow the following steps:
- Resetting the Printer:
This method of troubleshooting is remarkable to the first one. Users must unplug every cable from the printer. Before continuing, give the printer around five minutes to recover. With this technique, the users could require assistance from a third party.
- Installing and Updating the Printer driver:
There's a risk that malware is to blame for Epson error number 0x97. If so, install or update the malware protection software on the printer.
- Disconnecting everything from the printer:
Users must stop all printing tasks and remove all paper jams from their printer before continuing. Disconnect each cable attached to the printer once the user has cleared any paper jams.
- Cleaning the Print Head:
The solution would be to clean the printhead thoroughly using a lint-free cloth damped in warm water. Cleaning the nozzle area until there's no more black ink on the fabric. Then, reinstall all the cartridges into their respective slots.
- Reinstalling ink cartridges:
Tap the "Home" button on the Epson printer. Next, choose "Printhead nozzle check". The users can identify the nozzle that is blocked. If the user finds no gaps in the printed lines, choose "Done". Do not turn off the printer until the cleaning process is complete.
THE EPSON PRINTER NOT PRINTING BLACK
If the printer only prints in black, a software setting or the Ink option in the printer driver can be adjusted to Black instead of Color. Furthermore, the print head nozzles may be obstructed. Cleaning the print heads is as simple as running a head cleaning operation and printing a nozzle check pattern from the Utility part of the Epson printer software. If the Epson printer not printing black, the user must follow the following steps:
- Open the printer cartridge to inspect the nozzle.
- The cartridge for the Epson printer contains a screw that must be unscrewed to reach the cartridge.
- The cartridge's nozzle head was clogged with ink, preventing the ink from flowing, therefore removing the pipe print initiation.
Other Epson Errors: Epson Printer in Error State, Epson error code 0xea
To avoid printer damage, follow the instructions and thoroughly clean the printer head. Before turning on the printer and opening the output tray, check the ink levels in each tank. Following that, a couple of fast cleanings above the bottom line should be enough to clear the printer head.
